Recording EMX output onto PC

Ask and discuss about how to work with electribes. Share your discoveries and ideas.

Moderator: Aciphecs

Re: Recording EMX output onto PC

Postby Stilo on Tue Jun 10, 2008 9:49 am

mindstarr wrote:Does anyone have any advice on how to connect the EMX direct to a PC? Please assume very low level of sound engineering knowledge.

It's really not hard. Plug one side of the cable to EMX. Plug other side of the cable to Line In of Laptop. You just need the right cable. Then select "Line In" as recording source in your Volume Control.
Electribe Newbie
Posts: 43
Joined: Sat May 17, 2008 1:59 am
Location: Germany

Re: Recording EMX output onto PC

Postby stitch on Tue Jun 10, 2008 10:41 am

I would get an external soundcard, e.g. the tascam 122 ->;9,15,68,16.html

for going directly into the pc you will have to get the right cables, and I don't know if you can get the 2x6.3mm to line in directly, I would assume you need

these -> Image

and this ->

I haven't done it myself though...

edit: ...and of course you'd need a line in-port on your pc. most laptops don't offer a line-in-port.
Electribe Newbie
Posts: 22
Joined: Fri May 16, 2008 2:23 am
Location: HH/TÜ/RV


Return to Technical Talk

Who is online

Users browsing this forum: No registered users and 5 guests