make own pattern

Read and write articles, faq's, tips/tricks, tutorials and other forms of helpful information about Electribes.

Moderator: Aciphecs

make own pattern

Postby mark on Fri Nov 14, 2014 3:20 am

hey ,
I got the electribe Rmk2 , example : can i take the kick from AO1 and put it in A02 so i can make my own pattern?
please help
thanks
mark
Electribe Newbie
 
Posts: 3
Joined: Fri Nov 14, 2014 3:12 am

Re: make own pattern

Postby Blue Monster 65 on Fri Nov 14, 2014 3:53 pm

I never had an ER-1, so I can't say, but here's a link to the manual: http://c3.zzounds.com/media/ER1mkII_E1- ... d1bdf6.pdf
Blue Monster 65
EF Special Task Force
 
Posts: 369
Joined: Thu Sep 10, 2009 10:53 am
Location: down in The Lab ...

Re: make own pattern

Postby mark on Sat Nov 15, 2014 2:02 am

thanx , but the manual doesn't help
mark
Electribe Newbie
 
Posts: 3
Joined: Fri Nov 14, 2014 3:12 am

Re: make own pattern

Postby Blue Monster 65 on Sat Nov 15, 2014 5:47 am

Actually, it does! I looked it up:

Copying a part (COPY PART)
You can copy the sound settings and rhythm pattern data (in- cluding motion sequence) from another part to the selected part.
1. If the pattern is playing, press the Stop/Cancel key to stop
playback.
2. Press a part key to select the copy destination part (the key will light).
3. Hold down the SHIFT key and press step key 10 (COPY PART). (Key 10 will blink.) The display will begin blinking.
4. Rotate the dial to select the copy source pattern number.
5. Use the part keys to select the copy source part. (The copy source key will blink, and the copy destination key will be dark.)
6. Press step key 10 once again to execute the Copy Part opera- tion.
To cancel, press the Stop/Cancel key.
When copying between parts of the same type, the sound and the rhythm pattern data will both be copied. However when copying between parts of a different type, the sound will not be copied.
For details on data copy within the same part, refer to the following section "Data Copy within a part."

Hope that helps!
Blue Monster 65
EF Special Task Force
 
Posts: 369
Joined: Thu Sep 10, 2009 10:53 am
Location: down in The Lab ...

Re: make own pattern

Postby mark on Sat Nov 15, 2014 6:01 am

Thx ,
the cross mod button was on , it works thx
mark
Electribe Newbie
 
Posts: 3
Joined: Fri Nov 14, 2014 3:12 am

Re: make own pattern

Postby Blue Monster 65 on Sat Nov 15, 2014 1:35 pm

Great! Glad to hear it.
Blue Monster 65
EF Special Task Force
 
Posts: 369
Joined: Thu Sep 10, 2009 10:53 am
Location: down in The Lab ...


Return to Articles And Tutorials

Who is online

Users browsing this forum: No registered users and 2 guests

cron